Standard use of a coffee machine.
Descaling
COFFE2GO Passport
Give your MOKA GO regular maintenance
Limescale can gradually slow down the water flow and affect the final taste of your coffee. Regular descaling helps to keep your MOKA GO clean, reliable, and ready for your next journey.
Longer lifespan
Helps protect the internal system from deposits.
Stable flow
A clean system facilitates the even passage of water.
Pure coffee flavour
Less sediment means better preparation conditions.
Indicative interval
How often to descale
The suitable interval depends on the number of coffees prepared and the hardness of the water you use.
Regular and more frequent use.
Adapt the interval to local conditions.
After descaling, run the coffee machine with clean water for at least two separate cycles without a capsule and without ground coffee.
Before the start
Prepare a descaling solution
Use a descaler designed for espresso machines and follow the recommended amount.
Time for one MOKA GO cycle
First, add descaler to the tank, then top up with warm water to a total volume of approximately 80 ml.
10 ml
descaler
Do 80 ml
top up with warm water
Complete guide
Step-by-step descaling
Use the coffee machine without a capsule and without ground coffee throughout the entire process.
01
Check the coffee maker's charge
Before you begin, ensure MOKA GO has enough power to complete the entire process.
If necessary, charge it fully first.
02
Remove the coffee or capsule
Select the used capsule or ground coffee. The main holder and capsule adapter can remain in place during descaling.
03
Pour the prepared solution
Add approximately 10 ml of descaler to the reservoir and fill with warm water to a total volume of approximately 80 ml.
04
Allow the solution to act
Leave the solution in the system for approximately 10 minutes to allow it to start releasing limescale deposits.
Do not switch on the coffee machine during this time.
05
Start heated cycle
Place the coffee machine over a large enough container or sink. Turn on the heating and let the entire prepared solution run through the system.
Always perform the cycle without the capsule.
06
Rinse the tank
After emptying, rinse the coffee machine and fill the tank with clean, lukewarm water.
07
Start cold extraction
Double-press the button to start extraction without heating and let the full volume of clean water run through.
08
Perform a warm flush
Pour in clean water again and start heating. There is no need to wait for it to heat up completely. You can end the cycle when approximately two to three LED lights are on.
09
Complete the final rinse
Fill the tank again with clean, lukewarm water and start a cold extraction without heating. Let the entire volume run through.
The water at the outlet should be clean and free of the product's odour.MOKA GO is ready
The descaling is complete. Before the next use, rinse the removable parts and let them dry.
Rinse the main bracket
Wipe down the coffee machine body
Check battery status
Store it in a dry place
Carry on
Further assistance for your MOKA GO
Return to the roundabout or continue to further practical information.